Independent reviews, comparisons, and buying guides for cutting accessories and workshop add-ons used in American home shops.

The Bench Review

GRR-Ripper GR-100+ Pushblock Review: 8.6/10 for Thin Rips

GRR-Ripper GR-100+ pushblock review: 8.6/10 for 1/4-inch to 5-inch rips, three-direction control and $36.75 sale price.

Bench Review Lab

Is the GRR-Ripper GR-100+ worth it for thin rips?

GRR-Ripper GR-100+ pushblock scores 8.6 out of 10 for small-shop thin ripping from 1/4 inch to 5 inches. It suits cabinetmakers cutting drawer parts, dividers, and edge banding where fingers stay too close to the blade. It does not suit shops ripping panels wider than 5 inches or buyers wanting built-in dust collection. The biggest strength is three-direction pressure that holds both keeper and offcut through narrow cuts. The biggest weakness is mid-width setup near 3 inches to 3.5 inches, where the outer leg can enter the blade path. Prices below are USD listings seen in November 2026.

What does the GRR-Ripper GR-100+ include in the box?

GRR-Ripper GR-100+ ships with one body, three legs, and setup guides for 1/4-inch to 5-inch rips. Specs below come from Woodcraft and MicroJig pages seen in November 2026.

Spec GR-100+ value Category average
Cutting range, table saw 1/4 inch to 5 inches No public data
Legs in box Center leg, 1/2-inch leg, 1/4-inch leg No public data
Extras in box Balance Support, 2 SafeRip cursors, 2 SafeRip scales, manual No public data
Package size 6.25 x 8.5 x 2.75 inches No public data
Machine fit Table saw with fence Router table and jointer use documented separately

MicroJig describes the baseline kit on its guide blog published in December 2025. “The GR-100+ is our baseline unit.” Ralph Bagnall, R&D Manager, wrote on the MicroJig blog in December 2025. The same guide states the narrow limit directly. “Right out of the box it can rip as narrow as 1/4" (6.35mm) wide.” Ralph Bagnall wrote on the MicroJig blog in December 2025.

How the GRR-Ripper GR-100+ earned 8.6 out of 10

GRR-Ripper GR-100+ totals 8.6 out of 10 under The Bench Review method logged in November 2026. Weights below follow that method log from November 2026. Scores reflect specs and retailer feedback patterns, not lab cuts.

Dimension Score Weight Why
Fit and compatibility 9 25% Fits fenced saws from 1/4 inch to 5 inches
Cutting performance 8 20% Holds keeper and offcut on narrow rips
Durability and build 9 20% Replaceable plastic parts absorb blade contact
Dust handling and safety 9 15% Moving blade guard keeps hands above blade
Ease of use 8 10% Leg and handle changes need setup time
Value 8 10% $36.75 sale price undercuts $49.00 regular

Math checks as 9x0.25 plus 8x0.2 plus 9x0.2 plus 9x0.15 plus 8x0.1 plus 8x0.1 for 8.6. Band meanings come from The Bench Review method log in November 2026, where 80 to 89 means Strong for regular shop use.

GRR-Ripper GR-100+ fits fenced saws from 1/4 inch to 5 inches

GRR-Ripper GR-100+ covers rip cuts from 1/4 inch to 5 inches on table saws with a fence. The Woodcraft spec listing seen in November 2026 gives that range for model GR-100+. The adjustable center leg shifts sideways so the blade passes without cutting the leg.

The SafeRip cursor and scale set the center leg without leaning over the blade. MicroJig published the setup guide in December 2025 with fence-referenced marks on both sides of the leg. This dimension is assessed from specs and user feedback, not shop cuts.

Mid-width rips near 3 inches to 3.5 inches need a workaround on the base kit. The outside leg can sit in the blade path at those widths. Users turn the block to guide off the fence with the Balance Support, which leaves less support on narrow boards. That limit costs it one point on fit.

GRR-Ripper GR-100+ holds narrow stock through thin rips

GRR-Ripper GR-100+ applies downward pressure for flat stock and inward pressure against the fence. The two pressures keep both sides of the cut parallel to the blade. The maker page accessed in November 2026 links stray from the fence to kickback risk.

Forward pressure feeds stock at a steady rate to limit burning and blade marks. Two blocks used hand over hand keep long stock moving without stops. The Green GRR-RIP tread holds hardwoods plus plastics and aluminum listed by the maker. This dimension is assessed from specs and user feedback, not shop cuts.

Shops cutting drawer sides or edge banding gain the most here. A 3-inch flex hose handles chips at the saw, while the block itself has no dust port. Cut quality still depends on a sharp blade and a flat fence face.

GRR-Ripper GR-100+ uses replaceable plastic that survives blade nicks

GRR-Ripper GR-100+ uses high-impact plastic that absorbs contact instead of shattering. The maker FAQ accessed in November 2026 says every part is individually replaceable across models. A nicked center leg swaps out without replacing the body.

The treaded Green GRR-RIP pads keep traction when sawdust coats the surface. Cleaning with denatured alcohol restores grip per maker guidance accessed in November 2026. Sunlight exposure can degrade the pads, so shaded storage matters.

The handle angle adjusts for comfort across long sessions. Hardware includes the Balance Support for small parts on the saw and router table. This dimension is assessed from specs and user feedback, not shop cuts.

GRR-Ripper GR-100+ guards hands without a stock blade guard

GRR-Ripper GR-100+ acts as a moving blade guard on 4 machine types across 2 pairs. It covers the table saw and router table as one pair. It covers the jointer and band saw as the second pair.

The block must pass over the blade, so the stock overhead guard comes off for rip cuts. Hands stay on the tall handle above the cut line. That tradeoff suits small parts but removes overhead dust pickup at the blade.

The plastic body will not trip a SawStop brake per maker FAQ accessed in November 2026. Shops pairing the block with a Shinto saw rasp replacement blade for hand fitting keep machine shaping and hand shaping separate. No dust extraction claim applies to this block.

GRR-Ripper GR-100+ adjusts fast once leg positions are learned

GRR-Ripper GR-100+ changes rip width with 2 SafeRip cursors and 2 printed scales. The cursor shows which side of the center leg stays clear of the blade. First-time setup takes longer than a plain push stick.

The legs slide and lock with included hardware. The Balance Support squares narrow parts without a second fence. Small-shop users in fine woodworking tools tests gain control but lose the speed of a fixed stick.

The handle bridge and gravity heel stay optional extras on this base kit. Buyers wanting those parts from the start pay more for a larger bundle. That added learning curve sets ease at 8.

GRR-Ripper GR-100+ value peaks at the $36.75 sale price

GRR-Ripper GR-100+ value rests on a $36.75 sale price against a $49.00 regular price. Both figures are Rockler listings for the exact GR-100+ kit seen in November 2026. TayTools listed the same kit at $49.00 in November 2026.

Woodcraft listed the GR-100+ at $49.99 in November 2026. The spread across the three sellers was $13.24 in November 2026. Buyers who rip thin stock weekly spread that cost across many cuts.

Occasional users may find a plain push stick cheaper for wide rips. The GR-100+ earns its price on strips under 1 inch where fingers sit too close. That narrow-rip focus sets value at 8.

GRR-Ripper GR-100+ suits narrow-rip shops with these tradeoffs

GRR-Ripper GR-100+ suits repeat narrow ripping better than general pushing tasks. Fit limits and setup time shape the call.

Suits:

  • Shops ripping drawer sides and dividers from 1/4 inch to 2 inches
  • Owners cutting edge banding who need the offcut held past the blade
  • Router table users guiding small rails with hands above the bit
  • Jointer users face-jointing short boards with added grip

Does not suit:

  • Shops ripping panels wider than 5 inches in one pass
  • Buyers wanting built-in dust collection at the blade
  • Users who refuse setup changes between widths
  • Budget buyers who only rip wide stock a few times per year

What does the GRR-Ripper GR-100+ cost in November 2026?

GRR-Ripper GR-100+ cost $36.75 on sale at Rockler in November 2026. The regular price at the same listing was $49.00 in November 2026. All prices here are USD for the exact GR-100+ kit.

TayTools asked $49.00 for the kit in November 2026. Woodcraft asked $49.99 for the kit in November 2026. MicroJig direct listed the newer 100AIR single at $59.99 in November 2026, a separate model.

The Rockler sale cut 25% off regular in November 2026. No coupon applied at the listed prices above. Check the seller return window before ordering, since shop return terms vary.

When does another pushblock beat the GRR-Ripper GR-100+?

GRR-Ripper GR-100+ loses to simpler or larger kits in 3 clear cases. Each case below names when to switch.

  1. GRR-RIPPER 2GO suits quick wide rips where setup speed beats thin-strip control.
  2. GRR-RIPPER 100AIR at $59.99 suits frequent tail-end hooking with built-in X-AIR heels.
  3. Plain push stick suits rare wide rips where a $49.00-class jig cannot pay back.

Prices above are USD listings seen in November 2026. Model choice turns on rip width mix and tolerance for setup.

GRR-Ripper GR-100+ FAQs

What rip range does the GRR-Ripper GR-100+ cover?

GRR-Ripper GR-100+ cuts strips from 1/4 inch to 5 inches on a fenced table saw. The 1/4-inch leg controls the keeper piece while the adjustable center leg clears the blade path. The SafeRip cursor sets clearance without leaning over the blade. Use two blocks hand over hand for stock longer than the saw top.

Can the GRR-Ripper GR-100+ work on machines besides a table saw?

Yes, the GRR-Ripper GR-100+ works on router tables, jointers, and band saws. The Green GRR-RIP pads grip stock and the tall body keeps hands above cutters. The Balance Support steadies small parts on flat tables. Reset leg positions for each machine before feeding stock to keep control steady.

How do owners restore grip on the GRR-Ripper GR-100+?

Clean the GRR-Ripper GR-100+ pads with denatured alcohol when grip fades. The maker guidance accessed in November 2026 says dust buildup causes most grip loss and sunlight can damage the pads. Wipe the treaded grooves until dust releases from the surface. Store the block out of direct sunlight between sessions.

What happens if the blade cuts the GRR-Ripper GR-100+ leg?

GRR-Ripper GR-100+ uses replaceable plastic legs and body parts after blade contact. The maker FAQ accessed in November 2026 says every part is individually replaceable and compatible across GRR-RIPPER models. Order the matching leg and swap it with the included hardware. Keep routing and sawing work paused until the damaged leg is replaced.

What warranty covers the GRR-Ripper GR-100+?

GRR-Ripper GR-100+ carries a 3-year extended warranty plus a satisfaction guarantee from MicroJig. The MicroJig product page accessed in November 2026 states both terms for the GRR-RIPPER line. The warranty covers manufacturing defects under normal shop use. Retailer return windows vary, so check the seller policy before ordering the kit.

Related articles