URAC 185 Laminating Glue is a two-part urea-formaldehyde system with a 10-to-1 resin-to-hardener mix by weight, according to DGR Industrial Products as accessed in November 2026. The mixed glue cures at 70°F and above, according to DGR Industrial Products as accessed in November 2026. Our testing method compares such cure claims against published press times.
What is URAC 185 Laminating Glue best used for?
URAC 185 Laminating Glue fits furniture and millwork joints with a water-resistant urea-formaldehyde bond, according to DGR Industrial Products as accessed in November 2026. The same product also bonds hollow-core doors. It also bonds decorative laminate, according to DGR Industrial Products as accessed in November 2026.
“This is an industrial quality modified urea/formaldehyde resin glue,” stated by DGR Industrial Products on its product page as accessed in November 2026. CP Adhesives as accessed in November 2026 describes general urea resin as heat-resistant with Type II water resistance.
| Shop job | Fit for URAC 185 Laminating Glue | Practical note |
|---|---|---|
| Furniture and millwork | High | Rigid glue line suits joints that must not creep |
| Hollow-core doors and laminate | High | Thin spread limits bleed-through on veneer |
DGR Industrial Products as accessed in November 2026 notes use by fly-rod makers and wooden-bow makers. The same shop catalog lists Ceramithane Gloss in a separate entry.
How does URAC 185 Laminating Glue mix and cure?
URAC 185 Laminating Glue uses 10 parts resin to 1 part hardener by weight and cures at 70°F, according to DGR Industrial Products as accessed in November 2026. The kit pairs liquid resin with CYCAT-185 powder hardener, according to DGR Industrial Products as accessed in November 2026. General urea-resin guidance from CP Adhesives as accessed in November 2026 lists 5.5 hours of pot life at 70°F and 3 hours at 90°F.
The same CP Adhesives guidance as accessed in November 2026 lists 40 minutes of assembly time at 70°F and 20 minutes at 90°F. Cold-press time runs 4 hours to 6 hours at 70°F, according to CP Adhesives as accessed in November 2026.
How long does URAC 185 Laminating Glue last in storage?
URAC 185 Laminating Glue keeps a minimum 1-year shelf life below 60°F, according to DGR Industrial Products as accessed in November 2026. The resin ships in a 32 oz aluminum cylinder, according to DGR Industrial Products as accessed in November 2026. The hardener ships in an 8 oz aluminum cylinder, according to DGR Industrial Products as accessed in November 2026.
CP Adhesives as accessed in November 2026 stores general powder urea at 60°F to 70°F and shortens life to 6 months at 90°F.
Is URAC 185 Laminating Glue still available in quart size?
URAC 185 Laminating Glue quart packs paired 32 oz resin with 8 oz hardener at $38.74, according to DGR Industrial Products as of November 2026. A PaleoPlanet forum thread dated October 2012 reports Urac 185 as discontinued with Unibond 800 as replacement. The safety sheet hosted by Highland Woodworking and dated October 2004 identifies the product as URAC 185 Adhesive Resin in the urea-formaldehyde family.
Freshly machined stock within 12 hours improves bonds, according to CP Adhesives as accessed in November 2026, and the same flattening step precedes work with an ECE Scrub Plane.
URAC 185 Laminating Glue FAQ
Does URAC 185 Laminating Glue resist water?
Yes, URAC 185 Laminating Glue forms a water-resistant urea-formaldehyde joint for furniture and millwork, according to DGR Industrial Products as accessed in November 2026. CP Adhesives as accessed in November 2026 rates general urea resin as Type II water-resistant.
What is the mix ratio for URAC 185 Laminating Glue?
The ratio is 10 parts resin to 1 part hardener by weight, according to DGR Industrial Products as accessed in November 2026. Cure proceeds at 70°F and above, according to DGR Industrial Products as accessed in November 2026.
How should shops store URAC 185 Laminating Glue quart packs?
Store URAC 185 Laminating Glue below 60°F for a minimum 1-year life, according to DGR Industrial Products as accessed in November 2026. General powder urea keeps 6 months at 90°F, according to CP Adhesives as accessed in November 2026.
Can URAC 185 Laminating Glue cure without heat?
Yes, URAC 185 Laminating Glue cures at 70°F and above, according to DGR Industrial Products as accessed in November 2026. Press time is 4 hours to 6 hours at 70°F, according to CP Adhesives as accessed in November 2026.